Huawei Quidway S6500 Series Command Manual

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-15
Description
Using pim neighbor-policy command, you can set to filter the PIM neighbors on the
current interface. Using undo pim neighbor-policy command, you can remove the
setting.
Only the routers that match the filtering rule in the ACL can serve as a PIM neighbor of
the current interface.
The new configuration overwrites the old one if you run the command for a second
time.
Example
# Configure that 10.10.1.2 can serve as a PIM neighbor of the Vlan-interface10, but not
10.10.1.1.
[Quidway-Vlan-interface10] pim neighbor-policy 2000
[Quidway-Vlan-interface10] quit
[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule permit source 10.10.1.2 0
[Quidway-acl-basic-2000] rule deny source 10.10.1.1 0
5.1.18 pim sm
Syntax
pim sm
undo pim sm
View
Interface view
Parameter
None
Description
Using pim sm command, you can enable the PIM-SM protocol on an interface. Using
undo pim sm command, you can disable the PIM-SM protocol.
By default, PIM-SM is disabled.
Once enabled PIM-SM on an interface, PIM-DM cannot be enabled on the same
interface and vice versa.
Example
# Enable PIM-SM on VLAN-interface10.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English