Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
0错误！表格结果无效。
Huawei Technologies Proprietary
1-14
Field Description
added
Number of added routes after the router is rebooted or the
routing table is cleared last time.
deleted
Number of deleted routes (such routes will be freed in a
period of time)
Total Total number of the different kinds of routes.
1.1.9 display ip routing-table verbose
Syntax
display ip routing-table verbose
View
Any view
Parameter
None
Description
Using display ip routing-table verbose command, you can view the verbose routing
table information.
With the verbose parameter, this command displays the verbose routing table
information. The descriptor describing the route state will be displayed first, then the
statistics of the entire routing table will be output and finally the verbose description of
each route will be output.
All current routes, including inactive route and invalid route, can be displayed using
display ip routing-table verbose command.
Example
# Display the verbose routing table information.
<Quidway> display ip routing-table verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Destinations: 3 Routes: 3
Holddown: 0 Delete: 62 Hidden: 0
**Destination: 1.1.1.0 Mask: 255.255.255.0
Protocol: #DIRECT Preference: 0
*NextHop: 1.1.1.1 Interface: 1.1.1.1(Vlan-interface1)

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English