Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 6 IP Routing Policy Configuration Commands
Huawei Technologies Proprietary
6-5
6.1.6 apply isis
Syntax
apply isis [ level-1 | level-2 | level-1-2 ]
undo apply isis
View
Route policy view
Parameter
level-1: Set to import the matched route to level-1 area.
level-2: Set to import the matched route to level-2 area.
level-1-2: Set to import the matched route to both level-1 and levle-2 area.
Description
Using apply isis command, you can configure to apply the level of a matched route to
be imported to level-1, level-2 or level-1-2. Using undo apply isis command, you can
cancel the apply sub-statement.
By default, no apply clause is defined.
For the related commands, see if-match interface, if-match acl, if-match ip-prefix,
if-match ip next-hop, if-match cost, if-match tag, route-policy, apply ip next-hop,
apply cost, apply origin, apply tag.
Example
# Define a set clause, setting to import the route to level-2.
[Quidway-route-policy] apply isis level-2
6.1.7 apply local-preference
Syntax
apply local-preference local-preference
undo apply local-preference
View
Route policy view
Parameter
local-preference: New set local preference.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English