Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
Chapter 3 ACL Control Commands to
Control Login Users
Huawei Technologies Proprietary
3-1
Chapter 3 ACL Control Commands to Control
Login Users
3.1 The ACL Control Commands to Control Login Users
3.1.1 acl
Syntax
acl acl-number { inbound | outbound }
undo acl { inbound | outbound }
View
User interface view
Parameter
acl-number: The number identifier of number-based ACLs, ranging from 2000 to 3999.
inbound: Performs ACL control to the users who access the local switch using
TELNET.
outbound: Performs ACL control to the users who access other switches from the local
switch using TELNET.
Description
Using the acl command, you can reference ACL and implement the ACL control to the
TELNET users. Using the undo acl command, you can remove the control to the
TELNET users.
The ACLs referenced by this command can only be the basic and advanced
number-based ACLs.
Example
# Perform ACL control to the users who access the local switch using TELNET (basic
ACL 2000 has been defined).
[Quidway] user-interface vty 0 4

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English