Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-38
name with a character string started with English letters (that is [a to z, A to Z]),
excluding space and quotation marks.
Description
Using the traffic-statistic command, you can activate ACL and perform traffic statistic
(the command is only effective to permit rule). Using the undo traffic-statistic
command, you can remove traffic statistics.
The traffic-statistic command is used to count the number of hardware matches
during the course of packet forwarding. You can use the display qos-interface
traffic-statistic command to view this information.
Only the rule with the action of permit can be activated by this command successfully.
For the related configuration, see display qos-interface traffic-statistic.
Example
# Perform traffic statistic to the packets that match with the permit rule of ACL 2000.
[Quidway-qoss-Ethernet3/0/1] traffic-statistic inbound ip-group 2000
To Next Page
Loading...
