Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-8
For the related commands, see display debugging.
Example
# Enable IP Packet debugging.
<Quidway> debugging ip packet
4.3.2 display diagnostic-information
Syntax
display diagnostic-information
View
Any view
Parameter
none
Description
Using display diagnostic-information command, you can view the current
configuration information about all running modules. You can use all these information
to help diagnose and troubleshoot the Ethernet switch.
When the Ethernet switch does not run well, you can collect all sorts of information
about the switch to locate the source of fault. However, each module has its
corresponding display command, which make it difficult for you to collect all the
information needed. In this case, you can use display diagnostic-information
command.
Example
# Display all system configuration information
<Quidway> display diagnostic-information
Redirect it to file?[Y/N]y
Please input the file name(*.txt)[flash:/diaginfo.txt]:
The file is already existing, overwrite it? [Y/N]y
This operation may take a few minutes, continue?[Y/N]y
..............................................................

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English