Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-10
2.1.8 display qos-interface traffic-limit
Syntax
display qos-interface [ interface-name | interface-type interface-num ] traffic-limit
View
Any view
Parameter
interface-name | interface-type interface-num: Interface of the switch, for more detail,
please refer to Command Manual – Port.
Description
Using the display qos-interface traffic-limit command, you can view the parameter
setting of traffic rate limitation. The displayed content includes the ACLs of the traffic to
be limited, the average of the limited rate and the related monitoring actions, etc.
For the related configuration, see traffic-limit.
Example
# Display the parameter configuration of traffic limitation.
<Quidway> display qos-interface gigabitEthernet5/0/1 traffic-limit
GigabitEthernet5/0/1: traffic-limit
Inbound:
Matches: acl 2000 rule 0 running
Target rate: 4 Mbps
Table 2-4 Field explanation of this command
Field Explanation
GigabitEthernet5/0/1:
traffic-limit
Inbound:
Matches: acl 2000 rule 0
running
Target rate: 4 Mbps
Traffic monitoring configuration information:
“inbound”means this configuration is effective to
packets received by interfaces.
“ Matches: acl 2000 rule 0 running Burst size: 64
Kbps” represents that 4 Mbps is the maximum rate
of the packets that match with subrule0 of ACL1.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English