Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-15
Parameter
protocol: Specify the source protocol for importing the routing information, which can be
direct, static, rip, bgp, and ospf etc.
value: Specify the metric of the imported route, ranging from 0 to 63.
type: Type of routing cost: internal indicates the routing cost in the same area;
external indicates the routing cost among areas. By default, the routing cost is
internal.
level-1: Configure to import the route into Level-1 routing table.
level-2: Configure to import the route into Level-2 routing table. If the level is not
specified, it defaults to importing the routes into level-2.
level-1-2: Configure to import the route into Level-1 and Level-2 routing table.
route-policy route-policy-name: Configure to import the routes matching the
conditions defined in the specified route-policy only. The length of route-policy-name
parameter ranges from 1 to 16 character string.
Description
Using import-route command, you can configure IS-IS to import the routing
information of other protocols. Using undo import-route command, you can cancel
this function.
By default, IS-IS does not import the routing information of other protocols.
IS-IS regards all the routes imported into the routing domain as the external routes,
which describe the way of routing outside the routing domain.
For the related commands, see import-route isis level-2 into level-1.
Example
# Configure IS-IS to import the routing information of OSPF.
[Quidway-isis] import-route ospf
4.1.17 import-route isis level-2 into level-1
Syntax
import-route isis level-2 into level-1 [ acl acl-number ]
undo import-route isis level-2 into level-1 [ acl acl-number ]
View
IS-IS view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English