Huawei Quidway S6500 Series Command Manual

Command Manual - Security
Quidway S6500 Series Ethernet Switches Chapter 2 AAA Configuration Commands
Huawei Technologies Proprietary
2-44
The value of minute is related to the performance of NAS and RADIUS server. The
smaller the value is, the higher the requirement for NAS and RADIUS server is. When
there are a large amount of users (more than 1000, inclusive), we suggest a larger
value. The following table recommends the ratio of minute value to number of users.
Table 2-2 Recommended ratio of minute to number of users
Number of users Real-time accounting interval (minute)
1 to 99 3
100 to 499 6
500 to 999 12
≥1000 ≥15
For the related commands, see retry realtime-accounting , radius scheme.
Example
# Set the real-time accounting interval of RADIUS scheme, “huawei”, to 15 minutes.
[Quidway-radius-huawei] timer realtime-accounting 15
2.2.28 timer response-timeout
Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS scheme view
Parameter
seconds: RADIUS server response timeout timer, ranging from 1 to 10 seconds. By
default, the value is 3.
Description
Using the timer response-timeout command, you can configure the RADIUS server
response timer. Using the undo timer command, you can restore the default.
If the NAS receives no response from the RADIUS server after sending a RADIUS
request (authentication/authorization or accounting request) for a period of time, the
NAS resends the request, thus ensuring the user can obtain the RADIUS service. You
can specify this period by setting the RADIUS server response timeout timer, taking into
consideration the network condition and the desired system performance.
For the related commands, see radius scheme and retry.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English