Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-30
Transit Area: 0.0.0.2
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
Table 3-15 Description of information generated by the command display ospf vlink
Field Description
Virtual-link
Neighbor-id
Router ID of virtual-link neighbor router
State State
Interface IP address the interface on the virtual link
Cost Route cost of the interface
Type Type: virtual link
Transit Area
ID of transit area that the virtual link passes, and it cannot be
backbone area, STUB area and NSSA area
OSPF timers, defining as follows:
Hello Interval of hello packet
Dead Interval of dead neighbors
Poll Interval of poll
Timers
Retransmit Interval of retransmitting LSA
Transmit Delay Delay time of transmitting LSA
3.1.27 filter-policy export
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ routing-protocol ]
undo filter-policy { acl-number | ip-prefix ip-prefix-name} export [ routing-protocol ]
View
OSPF view
Parameter
acl-number: Access control list number.
ip-prefix-name: Name of the address prefix list. The length of ip-prefix-name ranges
from 1 to 19 character string.
routing-protocol: Protocol advertising the routing information, including direct, isis,
bgp, rip and static at present.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English