Huawei Quidway S6500 Series Command Manual

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 1 GMRP Configuration Commands
Huawei Technologies Proprietary
1-2
Parameter
interface interface-list: Specifies Ethernet port list, expressed as interface-list =
{ { interface_type interface_num | interface_name
} [ to { interface_type interface_num
| interface_name } ] }&<1-10>. For meanings and value ranges of interface-type,
interface-number and interface-name, refer to the syntax description in the Port
Configuration of this manual.
Description
Using display gmrp statistics command, you can view the statistics information about
GMRP.
This command is used for displaying the statistics information about GMRP, including
the list of ports with GMRP enabled, GMRP status information, GMRP failed
registrations and last origin of GMRP packet data unit (PDU).
Example
# Display the statistics information about GMRP on Ethernet 2/0/1.
<Quidway> display gmrp statistics interface Ethernet 2/0/1
GMRP statistics on port Ethernet2/0/1
Gmrp Status : Enabled
Gmrp Failed Registrations : 0
Gmrp Last Pdu Origin : 0000-0000-0000
1.1.3 display gmrp status
Syntax
display gmrp status
View
Any view
Parameter
None
Description
Using display gmrp status command, you can view the status of global GMRP.
This command can be used for displaying the enabled/disabled status of global GMRP.
Example
# Display the status of global GMRP.
<Quidway> display gmrp status

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English