Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 Route Capacity Configuration Commands
Huawei Technologies Proprietary
7-1
Chapter 7 Route Capacity Configuration
Commands
7.1 Route Capacity Configuration Commands
7.1.1 display memory
Syntax
display memory [ slot slot-number ]
Mode
Any view
Parameter
slot-number: View the memory setting of the specified slot.
Description
Using display memory command, you can view the memory setting.
Example
# Display the current memory setting.
<Quidway> display memory
System Total Memory(bytes): 203563008
Total Used Memory(bytes): 77852012
Used Rate: 38%
The displayed information is described specifically in the following table:
Table 7-1 The description for the information displayed by the display memory
command
Item Description
System Total
Memory(bytes)
The total number of the Ethernet switch memory in byte.
Total Used
Memory(bytes)
The total number of the used Ethernet switch memory in byte.
Used Rate The used rate of the Ethernet switch memory

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English