Huawei Quidway S6500 Series - History-Command Max-Size; Idle-Timeout

Command Manual - Getting Started
Quidway S6500 Series Ethernet Switches Chapter 1 Logging in Ethernet Switch Commands
Huawei Technologies Proprietary
1-10
Input banner text, and quit with the character '%'.
Go on inputting the rest text and end your input with the first letter:
Hello! Welcome % (Press the <Enter> key)
[Quidway]
When you log on the switch again, the terminal displays the configured session
establishment title.
[Quidway] quit
<Quidway> quit
Please press ENTER
%SHELL: (The initial character “%” is the header contents)
Hello! Welcome
<Quidway>
1.1.11 history-command max-size
Syntax
history-command max-size value
undo history-command max-size
View
User interface view
Parameter
value: Defines the size of the history buffer, ranging from 0 to 256. By default, the size is
10, that is, 10 history commands can be saved.
Description
Using history-command max-size command, you can configure the size of the history
command buffer. Using undo history-command max-size command, you can restore
default size of the history command buffer.
Example
# Set the history buffer to 20, namely saving 20 history commands.
[Quidway-ui-aux0] history-command max-size 20
1.1.12 idle-timeout
Syntax
idle-timeout minutes [ seconds ]