Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-15
Parameter
None
Description
Using the ipx sap gns-load-balance command, you can configure the switch to
respond to GNS requests through round robin polling. Using the undo ipx sap
gns-load-balance command, you can configure the switch to respond to GNS
requests with information of the nearest server.
By default, the switch responds to SAP GNS requests using the known server
information in turn. This prevents a server from getting overloaded.
For the related command, see ipx sap gns-disable-reply.
Example
# Respond to GNS requests with information of the nearest server.
[Quidway] undo ipx sap gns-load-balance
7.1.19 ipx sap max-reserve-servers
Syntax
ipx sap max-reserve-servers length
undo ipx sap max-reserve-servers
View
System view
Parameter
length: The maximum length of the service information reserve-queue for one service
type. It is in the range 1 to 2048 and defaults to 2048.
Description
Using the ipx sap max-reserve-servers command, you can configure the maximum
length of the service information reserve-queue for one service type. Using the undo
ipx sap max-reserve-servers command, you can restore the default.
Example
# Set the maximum length of the service information reserve-queue for one service
type to 1024.
[Quidway] ipx sap max-reserve-servers 1024