Huawei Quidway S6500 Series Command Manual

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-7
View
User view
Parameter
mbr: Debugging information of PIM-SM multicast border router event.
verbose: Debugging detail information of PIM-SM.
mrt: Debugging information of PIM-SM multicast routing table.
timer: Debugging information of PIM-SM timer.
warning: Debugging information of PIM-SM warning message.
recv: Debugging information of PIM-SM receiving packets.
send: Debugging information of PIM-SM sending packets.
assert | bootstrap | crpadv | reg | regstop | jp: Packets type
assert | bootstrap | crpadv | jp | reg | regstop: Packets type.
Description
Using debugging pim sm command, you can enable PIM-SM debugging functions.
Using undo debugging pim sm command, you can disable the debugging functions.
By default, PIM-SM debugging functions are disabled.
Example
# Enable all PIM-SM debugging functions
<Quidway> debugging pim sm all
5.1.8 display pim bsr-info
Syntax
display pim bsr-info
View
Any view
Parameter
None
Description
Using display pim bsr-info command, you can view the BSR information.
For the related commands, see c-bsr and c-rp.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English