Huawei Quidway S6500 Series - Display Multicast Forwarding-Table

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 Multicast Common Configuration Commands
Huawei Technologies Proprietary
3-3
3.1.4 display multicast forwarding-table
Syntax
display multicast forwarding-table [ group-address [ mask { mask | mask-length } ] |
source-address [ mask { mask | mask-length } ] | incoming-interface register ] *
View
Any view
Parameter
group-address: Multicast group address, used to specify a multicast group, ranging
from 224.0.0.0 to 239.255.255.255.
source-address: Unicast IP address of the multicast source.
incoming-interface: Incoming interface of the multicast forwarding table.
register: Register interface of PIM-SM.
Description
Using display multicast forwarding-table command, you can view the information of
IP multicast forwarding table.
For the related command, see display multicast routing-table.
Example
# View the multicast forwarding table information.
<Quidway> display multicast forwarding-table
Multicast Forwarding Cache Table
Total 2 entries
00001. (4.4.4.4, 224.2.254.84), iif Vlan-interface1, 0 oifs
Matched 240 pkts(11288 bytes), Wrong If 0 pkts
Forwarded 232 pkts(11288 bytes)
00002. (4.4.4.4, 224.2.149.17), iif Vlan-interface1, 1 oifs
List of outgoing interface:
01: Vlan-interface2
Matched 236 pkts(3267 bytes), Wrong If 0 pkts
Forwarded 233 pkts(3267 bytes)
Matched 2 entries