Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 DHCP Configuration Commands
Huawei Technologies Proprietary
5-5
mac_address: User MAC address.
all: Cancel all address table entry.
dynamic: Cancel dynamic address table entry.
static: Cancel static address table entry.
Description
Using dhcp-security static command, you can configure a static address table entry
of DHCP Server group. Using undo dhcp-security command, you can cancel a
address table entry of DHCP Server group.
You can use the display dhcp-security command to view the user configuration of
DHCP Server group before you change corresponding IP address of the DHCP
Server group.
For the related command, see display dhcp-security.
Example
# Configure the user IP address and MAC address of DHCP Server group as 1.1.1.1
and 0005-5D02-F2B3 respectively.
[Quidway] dhcp-security static 1.1.1.1 0005-5D02-F2B3
5.1.6 dhcp-server
Syntax
dhcp-server groupNo
undo dhcp-server
View
VLAN interface view
Parameter
groupNo: DHCP Server group number; ranging from 0 to 19.
Description
Using dhcp-server command, you can configure the native DHCP Server group of
VLAN interface. Using undo dhcp-server command, you can cancel the VLAN
interface from its native DHCP Server group.
For the related command, see dhcp-server ip, display dhcp-server, display
dhcp-server interface vlan-interface, debugging dhcp-relay.
Example
# Add VLAN-Interface 1 to DHCP Server group1.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English