Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-5
z There should be no invisible character in the batch file. If invisible characters are
found, the batch command will quit the current execution without back off
operation.
z The contents of the batch file must be the standard command lines. If not, the
system prompts you the failure as you enter the wrong command in the CLI.
z The execute command cannot be executed as nested, that is, a batch file cannot
contain another batch file.
Example
# Execute the batch file “test.bat” in the directory of “flash:/”.
[Quidway] execute test.bat
1.1.6 file prompt
Syntax
file prompt { alert | quiet }
View
System view
Parameter
alert: Perform interactive confirmation on dangerous file operations; The default value
is alert, which configures to perform interactive confirmation on dangerous file
operations.
quiet: Do not prompt for the file operations.
Description
Using file prompt command, you can modify prompt modes of the file operation on the
Ethernet switch.
If the prompt mode is set as quiet, that is, no prompt for file operations, some
non-recoverable operations may lead to system damage.
Example
# Configure the prompt mode of file operation as quiet.
[Quidway] file prompt quiet
1.1.7 fixdisk
Syntax
fixdisk device

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English