Huawei Quidway S6500 Series Command Manual

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 1 GMRP Configuration Commands
Huawei Technologies Proprietary
1-1
Chapter 1 GMRP Configuration Commands
1.1 GMRP Configuration Commands
1.1.1 debugging gmrp
Syntax
debugging gmrp { event | packet }
undo debugging gmrp { event | packet }
View
User view
Parameter
event: GMRP event.
packet: GMRP packet.
Description
Using debugging gmrp command, you can enable GMRP debugging. Using undo
debugging gmrp you can disable GMRP debugging.
When IGMP-snooping is enabled on the switch, you can view these contents of the
IGMP snooping configuration: IGMP Snooping enabled or not, aging time of the port,
maximum query response time, aging time of the multicast port.
For the related command, see igmp-snooping.
Example
# Enable GMRP event debugging.
<Quidway> debugging gmrp event
GMRP: Max number of GMRP entries reached
1.1.2 display gmrp statistics
Syntax
display gmrp statistics [ interface interface-list ]
View
Any view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English