Huawei Quidway S6500 Series Command Manual

Command Manual - Port
Quidway S6500 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-13
Example
# Configure the detection interval for the external loopback condition of each port to 10
seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet 1/0/1
[Quidway-Ethernet1/0/1] port link-type trunk
[Quidway-Ethernet1/0/1] loopback-detection per-vlan enable
[Quidway-Ethernet1/0/1]
1.1.14 jumboframe enable
Syntax
jumboframe enable [ jumboframe-value ]
undo jumboframe enable
View
Ethernet port view
Parameter
jumboframe-value: Size of jumbo frame permitted to pass through, in the range of 1536
bytes to 9216 bytes.
Description
Using jumboframe enable command, you can permit jumbo frame to pass through the
current Ethernet port. Using undo jumboframe enable command, you can forbid
jumbo frame to pass through.
By default, the jumbo frame with length between 1518 bytes and 1536 bytes including
are permitted to pass through the Ethernet port.
Example
# Permit the jumbo frame with length between 1518 bytes and 1536 bytes to pass
through GigabitEthernet1/0/1.
[Quidway-GigabitEthernet1/0/1] jumboframe enable
1.1.15 mdi
Syntax
mdi { across | auto | normal }

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English