Command Manual - Port
Quidway S6500 Series Ethernet Switches Chapter 2 Link Aggregation Configuration Commands
Huawei Technologies Proprietary
2-10
alname: Aggregation group name, character string with 1 to 32 characters.
Description
Using link-aggregation group agg-id description command, you can configure
descriptor for an aggregation group. Using undo link-aggregation group agg-id
description command, you can delete aggregation group descriptor.
For the related command, see display link-aggregation verbose.
Example
# Configure myal1 as the descriptor of aggregation group 22.
[Quidway] link-aggregation group 22 description myal1
2.1.14 link-aggregation group mode
Syntax
link-aggregation group agg-id mode { manual | static }
undo link-aggregation group agg-id
View
System view
Parameter
agg-id: Aggregation group ID, in the range of 1 to 384.
manual: Manual aggregation group.
static: Static aggregation group.
Description
Using link-aggregation group agg-id mode command, you can create a manual or
static aggregation group. Using undo link-aggregation group command, you can
delete an aggregation group.
For the related command, see display link-aggregation summary.
Example
# Create manual aggregation group 22.
[Quidway] link-aggregation group 22 mode manual
2.1.15 port link-aggregation group
Syntax
port link-aggregation group agg-id
To Next Page
Loading...
