Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-31
4.1.37 set-overload
Syntax
set-overload
undo set-overload
View
IS-IS view
Parameter
none
Description
Using set-overload command, you can set overload flag for the current router. Using
undo set-overload command, you can cancel the overload flag.
By default, no overload flag is set.
If a router is configured with the overload flag, the routes it calculates will be ignored by
other routers in SPF calculation. (However the directly connected routes will not be
ignored.) And other routers should not send this router the packets which should be
forwarded by it.
Example
# Set overload flag on the current router.
[Quidway-isis] set-overload
4.1.38 silent-interface
Syntax
silent-interface silent-interface-type interface-number
undo silent-interface silent-interface-type interface-number
View
IS-IS view
Parameter
interface-type: Specifies the interface type.
interface-number: Specifies the interface number.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English