Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-14
2.1.16 rip metricin
Syntax
rip metricin value
undo rip metricin
View
Interface view
Parameter
value: Additional route metric added when receiving a packet, ranging from 0 to 16. By
default, the value is 0.
Description
Using rip metricin command, you can configure the additional route metric added to
the route when an interface receives RIP packets. Using undo rip metricin command,
you can restore the default value of this additional route metric.
For the related commands, see rip metricout.
Example
# Specify the additional route metric to 2 when the interface Vlan-interface 1 receives
RIP packets.
[Quidway] interface Vlan-interface 1
[Quidway-Vlan-interface1] rip metricin 2
2.1.17 rip metricout
Syntax
rip metricout value
undo rip metricout
View
Interface view
Parameter
value: Additional route metric added when transmitting a packet, ranging from 1 to 16.
By default, the value is 1.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English