Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-10
trap updown command, you can disable current port to transmit the LINK UP and LINK
DOWN trap information.
By default, the current port is capable of transmitting the LINK UP and LINK DOWN trap
information.
Example
# Enable current port Ethernet6/0/1 to transmit the LINK UP and LINK DOWN trap
information.
[Quidway-Ethernet6/0/1] enable snmp trap updown
5.1.11 snmp-agent local-engineid
Syntax
snmp-agent local-engineid engineid
undo snmp-agent local-engineid
View
System view
Parameter
local-engineid: Specify an engineID for the local SNMPv3 entity
engineid: Specify the engine ID with a character string, only composed of hexadecimal
numbers, the size must be in the range 5 to 32 bytes. An engine ID can contain up to
64 4-bit hexadecimal numbers. By default, the value is "Enterprise Number + device
information".
Description
Using snmp-agent local-engineid command, you can configure a name for a local or
remote SNMP engine on the Ethernet Switch. Using undo snmp-agent
local-engineid command, you can restore the default setting of engine ID.
Device information is determined according to different products. It can be IP address,
MAC address or user defined text. However, you must use numbers in hexadecimal
form.
Example
# Configure the ID of a local or remote device as 1234512345.
[Quidway] snmp-agent local-engineid 1234512345

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English