Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 DHCP Configuration Commands
Huawei Technologies Proprietary
5-4
Type: dhcp-request
ClientHardAddress: 0010-dc19-695d
DHCP ServerIpAddress: 192.168.1.2
*0.7200230-DHCP-8-dhcp_debug:
From DHCP Server to client:
Interface: VLAN-Interface 1
ServerGroupNo: 0
Type: dhcp-ack
ClientHardAddress: 0010-dc19-695d
AllocatedIpAddress: 10.1.1.1
*0.7200580-DHCP-8-largehop:
Discard DHCP request packet because of too large hop count!
*0.7200725-DHCP-8-invalidpkt:
Wrong DHCP packet!
Table 5-1 Description of information generated by the command debugging
dhcp-relay
Field Description
Interface Virtual interface of VLAN performing DHCP Relay
ServerGroupNo DHCP Server group number for Relay
Type DHCP packet type for Relay
ClientHardAddress Hardware address of Client
ServerIpAddress IP address of DHCP Server
AllocatedIpAddress IP address allocated to Client
5.1.5 dhcp-security static
Syntax
dhcp-security static ip_address mac_address
undo dhcp-security { ip_address | all | dynamic | static }
View
System view
Parameter
ip_address: User IP address.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English