Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-35
5.1.39 peer default-route-advertise
Syntax
peer group-name default-route-advertise
undo peer group-name default-route-advertise
View
BGP view
Parameter
group-name: Specify name of the peer group.
Description
Using peer default-route-advertise command, you can configure a peer group to
generate a default route for a peer. Using undo peer default-route-advertise
command, you can cancel the existing configuration.
By default, a peer group does not import the default route.
For this command, no default route needs to exist in the routing table. A default route is
sent unconditionally to a peer with the next hop as itself.
For the related commands, see default-route-advertise. .
Example
# Configure a peer group named test to generate a default route.
[Quidway-bgp] peer test default-route-advertise
5.1.40 peer description
Syntax
peer { group-name | peer-address } description description-line
undo peer { group-name | peer-address }
description
View
BGP view
Parameter
group-name: group name.
peer-address: address of the peer.
description-line: description information configured, which can be letters or figures.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English