Huawei Quidway S6500 Series Command Manual

Command Manual - Security
Quidway S6500 Series Ethernet Switches Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-12
1.1.12 dot1x retry-version-max
Syntax
dot1x retry-version-max max-retry-version-value
undo dot1x retry-version-max
View
System view
Parameter
max-retry-version-value: The maximum retry times for a device to send the version
request frame to an access user. The value ranges form 1 to 10, and defaults to 3.
Description
Using the dot1x retry-version-max command, you can set the maximum retry times
for an Ethernet switch to send version request frame to an access user. Using the undo
dot1x retry-version-max command, you can return the value to the defaults.
After sending client version request frame for the first time, if the switch receives no
response from the client response within a certain period of time (set by the version
authentication timeout timer), it resends version request again. When the switch
receives no response for the configured maximum times, it no longer authenticates the
version of the client, and perform the following authentications. If configured, this
command functions on all ports that enabled version authentication function.
See display dot1x and dot1x timer for related configuration.
Example
# Configure the switch to send version request frame to an access user 6 times at the
most.
[Quidway] dot1x retry-version-max 6
1.1.13 dot1x supp-proxy-check
Syntax
dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
undo dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
View
System view/Ethernet Port view
Parameter
logoff: Cuts network connection to a user upon detecting the use of proxy.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English