Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-9
Description
Using display snmp-agent usm-user command, you can view information of all the
SNMP usernames in the group username list.
Example
# Display the information of all the current users.
<Quidway> display snmp-agent usm-user engineid 1234567890
User name: userv3aaaa
Group name: managev3group
Engine ID: 1234567890
Storage-type: nonVolatile
UserStatus: active
The following table describes the output fields.
Table 5-4 Output description of the display snmp-agent usm-user command
Field Description
User name The name of SNMP user
Group name The name of SNMP group
Engine ID Character string identifying SNMP device
Storage-type The storing type of SNMP information
UserStatus The status of the user, may be active or inactive.
5.1.10 enable snmp trap
Syntax
enable snmp trap updown
undo enable snmp trap updown
View
Ethernet port view / VLAN interface view
Parameter
None.
Description
Using enable snmp trap updown command, you can enable the current port to
transmit the LINK UP and LINK DOWN trap information. Using undo enable snmp

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English