Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-12
authentication password into all the level-2 routing packets sent by this node, in a
certain mode.
For the related commands, see area-authentication-mode, isis
authentication-mode.
Example
# When you need to authenticate the level-2 routing packets, you can select the simple
mode, and the password is “huawei”.
[Quidway] isis
[Quidway-isis] domain-authentication-mode simple huawei
4.1.13 filter-policy export
Syntax
filter-policy acl-number export [ protocol ]
undo filter-policy acl-number export [ protocol ]
View
IS-IS view
Parameter
acl-number: Specify the number of the access control list, ranging 2000 to 3999.
protocol: Specify the protocols that distribute routing information, including direct, static,
rip, bgp, ospf, ospf-nssa and ospf-ase.
Description
Using filter-policy export command, you can configure to filter the routes distributed
by other routing protocol.
Using undo filter-policy export command, you can cancel the filtering rules.
By default, IS-IS does not receive routes distributed by other routing protocol.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English