Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-29
Intra Area: 2 Inter Area: 0 ASE: 0 NSSA: 0
Table 3-14 Description of information generated by the command display ospf routing
Field Description
Destination Destination network segment
Cost Cost of route
Type Type of route
NextHop Next hop of route
AdvRouter Router ID of the router advertising the route
Area Area ID
Intra Area Number of intra-area routes
Inter Area Number of inter-area routes
ASE Number of external routes
NSSA Number of NSSA routes
3.1.26 display ospf vlink
Syntax
display ospf [ process-id ] vlink
View
Any view
Parameter
process-id: Process ID of OSPF, ranging from 1 to 65535. The command is applied to
all current OSPF processes if you do not specify a process ID.
Description
Using display ospf vlink command, you can view the information about OSPF virtual
links.
Example
# View OSPF virtual links information.
<Quidway> display ospf vlink
OSPF Process 1 with Router ID 1.1.1.1
Virtual Links
Virtual-link Neighbor-id -> 2.2.2.2, State: Full
Cost: 0 State: Full Type: Virtual

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English