Huawei Quidway S6500 Series Command Manual

Command Manual - Port
Quidway S6500 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-8
1.1.7 duplex
Syntax
duplex { auto | full | half }
undo duplex
View
Ethernet port view
Parameter
auto: Port auto-negotiation attribute.
full: Port full-duplex attribute.
half: Port half-duplex attribute.
Description
Using duplex command, you can configure the full-duplex/half-duplex attribute of the
Ethernet port. Using undo duplex command, you can restore the duplex attribute of
the port to default auto-negotiation mode.
By default, the duplex attribute is auto.
For the related command, see speed.
Example
# Configure the Ethernet port Ethernet1/0/1 as auto-negotiation attribute.
[Quidway-Ethernet1/0/1] duplex auto
1.1.8 flow-control
Syntax
flow-control
undo flow-control
View
Ethernet port view
Parameter
none

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English