Huawei Quidway S6500 Series Command Manual

Command Manual - PoE
Quidway S6500 Series Ethernet Switches Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-7
1.1.5 poe enable
Syntax
poe enable
undo poe enable
View
Ethernet port view
Parameter
None
Description
Using the poe enable command, you can enable the PoE feature on a port.
Using the undo poe enable command, you can disable the PoE feature on a port.
By default, the PoE is enabled on each port when it is enabled on the board.
Example
# Disable PoE on the current port.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet3/0/1
[Quidway-Ethernet3/0/1] undo poe enable
# Enable PoE on the current port.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet3/0/1
[Quidway-Ethernet3/0/1] poe enable
1.1.6 poe enable slot
Syntax
poe enable slot slot-num
undo poe enable slot slot-num
View
System view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English