Huawei Quidway S6500 Series - Messenger

Command Manual - Security
Quidway S6500 Series Ethernet Switches Chapter 2 AAA Configuration Commands
Huawei Technologies Proprietary
2-12
View
System view
Parameter
cipher-force: Forced cipher mode specifies that the passwords of all the accessed
users must be displayed in cipher text.
auto: The auto mode specifies that a user is allowed to use the password command to
set a password display mode.
Description
Using local-user password-display-mode command, you can configure the
password display mode of all the accessing users. Using undo local-user
password-display-mode command, you can cancel the password display mode that
has been set for all the accessing users.
If cipher-force has been adopted, the user efforts of specifying to display passwords in
simple text will render useless.
The password display mode of all the accessing users defaults to auto.
For the related commands, see display local-user , password.
Example
# Force all the accessing users to display passwords in cipher text.
[Quidway] local-user password-display-mode cipher-force
2.1.12 messenger
Syntax
messenger time { enable limit interval | disable }
undo messenger time
View
ISP domain view
Parameter
limit: Remaining-online-time threshold in minutes, in the range of 1 to 60. When the
remaining online time of a user is equal to this threshold, the switch begins to send alert
messages to the client.
interval: Sending interval of alert messages in minutes, in the range of 5 to 60. It must
be a multiple of 5.