Huawei Quidway S6500 Series - System Management

Command Manual - Command Index
Quidway S6500 Series Ethernet Switches Appendix A Command Indexx
Huawei Technologies Proprietary
A-4
debugging pim sm QoS/ACL 5-6
debugging ssh server PoE 8-1
debugging vrrp System Management 1-1
default cost Multicast Protocol 2-2
default cost Multicast Protocol 3-5
default interval Multicast Protocol 3-6
default limit Multicast Protocol 3-6
default local-preference Multicast Protocol 5-8
default med Multicast Protocol 5-9
default tag Multicast Protocol 3-7
default type Multicast Protocol 3-8
default-cost Multicast Protocol 3-8
default-route-advertise Multicast Protocol 3-9
default-route-advertise Multicast Protocol 4-4
delete PoE 1-2
delete PoE 1-28
delete static-routes all Multicast Protocol 1-15
description VLAN 1-3
description Network Protocol 1-2
dhcp-security static Routing Protocol 5-4
dhcp-server Routing Protocol 5-5
dhcp-server ip Routing Protocol 5-6
dir PoE 1-3
dir PoE 1-29
disconnect PoE 1-30
display acl config STP 1-4
display acl mode STP 1-5
display acl running-packet-filter STP 1-6
display arp Routing Protocol 2-4
display arp | Routing Protocol 2-5
display arp interface Routing Protocol 2-6
display arp proxy Routing Protocol 4-1
display arp slot Routing Protocol 2-7
display arp source-suppression Routing Protocol 3-2