Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-4
Description
Use the display rip routing command to view RIP routing information.
Example
# Display RIP routing information.
<Quidway> display rip routing
RIP routing table: public net
A = Active I = Inactive G=Garbage collection
Destination/Mask Cost NextHop Age SourceGateway Att
6.0.0.0/8 1 10.153.25.22 4s 10.153.25.22 A
Table 2-2 Field description of the display rip routing command
Field Description
Destination/Mask Destination IP address/mask length
Cost Routing cost
NextHop Next hop address of the route
Age Aging time of the routing entry
SourceGateway
IP address of the source gateway from which the route is
learned
Attributes with three options available:
A The active route
I The inactive route
Att
G
The unreachable route in the state of
Garbage-collection. If the Garbage-collection
timer times out before the unreachable route is
updated by the update packets from the
neighbors, the entire routing entry is deleted
from the routing table
2.1.5 filter-policy export
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name | route-policy route-policy-name }
export [ routing-protocol ]
undo filter-policy { acl-number | ip-prefix ip-prefix-name | route-policy
route-policy-name } export [ routing-protocol ]

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English