Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-22
For detailed description of the output information, see Table 5-6.
5.1.22 display bgp routing-table flap-info
Syntax
display bgp routing-table flap-info [ { regular-expression as-regular-expression } |
{ as-path-acl acl-number } | { network-address [ mask [ longer-match ] ] } ]
View
Any view
Parameter
as-regular-expression: The route flap-info matching AS path regular expression.
acl-number: Number of the specified AS path to be matched, ranging from 1 to 199.
network-address: Network IP address related to the dampening information to be
shown
mask: Network mask.
longer-match: Show the route flap-info that is more specific than address, mask.
Description
Using display bgp routing-table flap-info command, you can view BGP flap-info.
Example
# Display BGP flap-info.
<Quidway> display bgp routing-table flap-info
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
B - balance
Dest/Mask Source Keepup-time Damping-limit Flap-times Origin As-path
--------------------------------------------------------------------
#D 11.1.0.0/16 133.1.1.2 48 1:20:30 4 IGP 200

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English