Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches
Chapter 6 IP Performance Configuration
Commands
Huawei Technologies Proprietary
6-3
source quench 0 redirects 0
echo reply 5 parameter problem 0
timestamp 0 information reply 0
mask requests 0 mask replies 0
time exceeded 0
Table 6-2 Description of the output information of the display icmp statistics
command
Field Description
bad formats Number of input packets in bad format
bad checksum Number of input packets with wrong checksum
echo Number of input/output echo request packets
destination unreachable
Number of input/output packets with unreachable
destination
source quench Number of input/output source quench packets
redirects Number of input/output redirected packets
echo reply Number of input/output echo reply packets
parameter problem Number of input/output packets with parameter problem
timestamp Number of input/output timestamp packets
information request Number of input information request packets
mask requests Number of input/output mask request packets
mask replies Number of input/output mask reply packets
information reply Number of output information reply packets
time exceeded Number of time exceeded packets
6.1.3 display ip socket
Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ]
View
Any view
Parameter
sock-type: The type of a socket: (tcp:1, udp 2, raw ip 3).
task-id: The ID of a task, with the value ranging from 1 to 100.
socket-id: The ID of a socket, with the value ranging from 0 to 3072.