Huawei Quidway S6500 Series - Debugging Pim DM; Debugging Pim Sm

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-6
5.1.6 debugging pim dm
Syntax
debugging pim dm { alert | all | mrt | timer | warning | { recv | send } { all | assert |
graft | graft-ack | join | prune } }
undo debugging pim dm { alert | all | mrt | timer | warning | { recv | send } { all |
assert | graft | graft-ack | join | prune } }
View
User view
Parameter
alert: Interoperation event debugging information of PIM-DM.
all: All the debugging information of PIM-DM.
mrt: Debugging information of PIM-DM multicast routing table.
timer: Debugging information of PIM-DM timer.
warning: Debugging information of PIM-DM warning message.
recv: Debugging information of PIM-DM receiving packets.
send: Debugging information of PIM-DM sending packets.
assert | graft | graft-ack | join | prune: Packets type.
Description
Using debugging pim dm command, you can enable PIM-DM debugging functions.
Using undo debugging pim dm command, you can disable the debugging functions.
By default, PIM-DM debugging functions are disabled.
Example
# Enable all PIM-DM debugging functions
<Quidway> debugging pim dm all
5.1.7 debugging pim sm
Syntax
debugging pim sm { all | verbose | mrt | warning | mbr {alert | fresh } | timer { assert
| bsr | crpadv | jp | jpdelay | mrt | probe | spt } | { recv | send } { assert | bootstrap |
crpadv | reg | regstop | jp } }
undo debugging pim sm { all | verbose | mrt | warning | mbr {alert | fresh } | timer
{ assert | bsr | crpadv | jp | jpdelay | mrt | probe | spt } | { recv | send } { assert |
bootstrap | crpadv | reg | regstop | jp
} }