Huawei Quidway S6500 Series Command Manual

Command Manual - Getting Started
Quidway S6500 Series Ethernet Switches Chapter 1 Logging in Ethernet Switch Commands
Huawei Technologies Proprietary
1-3
undo command-privilege view view command
View
System view
Parameter
level: Specifies the command level, ranging from 0 to 3.
view: Specifies the command view, which can be any of the views supported by the
switch.
command: Specifies the command to be configured.
Description
Using command-privilege level command, you can configure the priority of the
specifically command of the specifically view. Using undo command-privilege view
command, you can restore the default command priority.
The command levels include visit, monitoring, system, and management, which are
identified as 0 through 3 respectively. The network administrator can customize the
command levels as needed.
Example
# Configure the precedence of the command "interface" in system view as 0.
[Quidway] command-privilege level 0 view system interface
1.1.4 databits
Syntax
databits { 7 | 8 }
undo databits
View
User interface view
Parameter
7: The data bits are 7.
8: The data bits are 8.
Description
Using databits command, you can configure the data bits for AUX (Console) port.
Using undo databits command, you can restore the default bits of the AUX (Console).
This command can only be performed in AUX user interface view.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English