Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-5
Description
Using default-route-advertise command, you can create the default route of L1, L2
router. Using undo default-route-advertise command, you can cancel this
configuration.
By default, L2 router creates the default route.
This command can be set on L1 router or L2 router. By default, the route is generated
on L2 TCP. If level level-1 is set in Route-policy view, the default route will be generated
on L1 LSP. If level level-2 is set in Route-policy view, the default route will be generated
on L2 LSP. If level level-1-2 is set in Route-policy view, the default route will be
generated on both L1 LSP and L2 LSP.
Example
# Set the router to create the default route in the LSP of correspond level.
[Quidway-isis] default-route-advertise
4.1.5 display isis brief
Syntax
display isis brief
View
Any view
Parameter
None
Description
Use the display isis brief command to view the brief information of IS-IS.
Example
# View the brief information of IS-IS.
<Quidway> display isis brief
ISIS Protocol Brief Information:
Network-entity: 01.0001.0000.0000.0002.00
Is-level: level-1-2
Cost-style: narrow
Preference: 15
Timers:
spf-delay-interval: 5000
spf-slice-size: 0

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English