Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-8
Description
Using display isis mesh-group command, you can view the IS-IS mesh group.
This command is used for displaying the configurations of the mesh-group of the
current router interface.
Example
# Add Interface Vlan-interface 10 and Interface Vlan-interface 20 running IS-IS into
mesh group 100.
[Quidway-Vlan-interface10] isis mesh-group 100
[Quidway] interface Vlan-interface 20
[Quidway-Vlan-interface20] isis mesh-group 100
# Display the information of IS-IS mesh-group.
[Quidway-Vlan-interface20] display isis mesh-group
Interface Mesh-group/Blocked
Vlan-interface 10 100
Vlan-interface 20 100
4.1.9 display isis peer
Syntax
display isis peer [ verbose ]
View
Any view
Parameter
verbose: When this parameter is configured, the area address carried in the Hello
packet from the neighbor will be displayed. Otherwise, only the universal information
will be displayed.
Description
Using display isis peer command, you can view IS-IS peer information.
The display isis peer verbose command yields not only all the outputs of the display
isis peer command, but also the area address, Uptime and IP address of the directly
connected interface of the peer.
Example
# Output more information, using the verbose parameter.
<Quidway> display isis peer verbose

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English