Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-19
#
user-interface aux 0
user-interface vty 0 4
#
return
1.2.3 display this
Syntax
display this
View
Any view
Parameter
None
Description
Using the display this command, you can display the running configuration of the
current view. If you need to authenticate whether the configurations is correct after you
have finished a set of configurations under a view, you can use the display this
command to view the running parameters.
Some effective parameters are not displayed if they are the same with the default ones,
while some parameters, though have been configured by the user, if their related
functions are not effective, are not displayed either.
Associated configuration of the interface is displayed when executing the command in
different interface views; related configuration of the protocol view is displayed when
executing this command in different protocol views; and all the configuration of the
protocol view is displayed when executing this command in protocol sub-views.
For the related command, see save, reset, saved-configuration, display
current-configuration, display saved-configuration.
Example
# Display the running configuration parameters for the current view of the switch
system.
[Quidway] display this
1.2.4 display startup
Syntax
display startup

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English