Huawei Quidway S6500 Series - Display Cpu; Display Device

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-5
Example
<Quidway> display boot-loader
The primary app to boot of board 0 at the next time is: flash:/ccc.app
The backup app to boot of board 0 at the next time is: flash:/ddd.app
The app to boot of board 0 at this time is: flash:/ccc.app
3.1.6 display cpu
Syntax
display cpu [slot slot-num ]
View
Any view
Parameter
slot-num: Slot number.
Description
Using display cpu command, you can display CPU occupancy.
Example
# Display CPU occupancy.
<Quidway> display cpu
Board 0 CPU busy status:
13% in last 5 seconds
13% in last 1 minute
13% in last 5 minutes
Board 3 CPU busy status:
16% in last 5 seconds
19% in last 1 minute
19% in last 5 minutes
3.1.7 display device
Syntax
display device [ detail | [ shelf shelf-no ] [ frame frame-no ] [ slot slot-num ] ]
View
Any view