Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-6
Parameter
detail: display all slot detail information.
shelf-no: Shelf number.
frame-no: Frame number.
slot-num: Slot number.
Description
Using display device command, you can display the module type and working status
information of a card, including physical card number, physical daughter card number,
number of ports, hardware version number, FPGA version number, version number of
BOOTROM software, application version number, address learning mode, interface
card type and interface card type description, etc.
Example
# Show device information.
<Quidway> display device
Slot No. Brd Type Brd Status Subslot Num Sft Ver
0 LS83SRPC Normal 0 6506R-011
1 LS83SRPC Normal 0 6506R-011
2 LS81GT8U Normal 0 6506R-011
3 LS81FT48 Normal 0 6506R-011
4 NONE Absent Absent None
5 NONE Absent Absent None
6 LS81GT8U Normal 0 6506R-011
7 NONE Absent Absent None
# Show device information of S6506R.
<Quidway> display device
Slot No. Brd Type Brd Status Subslot Num Sft Ver
0 LS83SRPC Master 0 6506R-011
1 LS83SRPC Slave 0 6506R-011
2 LS81GT8U Normal 0 6506R-011
3 LS81FT48 Normal 0 6506R-011
4 NONE Absent Absent None
5 NONE Absent Absent None
6 LS81GT8U Normal 0 6506R-011
7 NONE Absent Absent None
The following table describes the displaying information.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English