Huawei Quidway S6500 Series - Display Acl Running-Packet-Filter

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 1 ACL Command
Huawei Technologies Proprietary
1-6
Example
# Display the ACL running mode chosen by the switch.
<Quidway>display acl mode
ACL mode: ip-based.
1.1.5 display acl running-packet-filter
Syntax
display acl running-packet-filter { all | interface { interface-name | interface-type
interface-num } }
View
Any view
Parameter
all: Represents all the ACLs to be displayed (including those identified by a number or a
name).
interface { interface-name | interface-type interface-num }: Interface of the switch, for
more detail, please refer to Command Manual – Port.
Description
Using the display acl running -packet-filter command, you can view the information
of the activated of ACL. The displayed content includes ACL name, subitem name and
activation status.
Example
# Display the information of the activated ACL of all interfaces.
<Quidway> display acl running-packet-filter all
acl std1 rule 0 running
acl std1 rule 1 running
Field explanation of this command