Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-22
4.5.12 info-center monitor channel
Syntax
info-center monitor channel { channel-number | channel-name }
undo info-center monitor channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.
channel-name: Specify the channel name. The name can be channel6, channel7,
channel8, channel9, console, logbuffer, loghost, monitor, snmpagent, trapbuffer.
Description
Using info-center monitor channel command, you can configure the channel to
output the log information to the user terminal. Using undo info-center monitor
channel command, you can restore the channel to output the log information to the
user terminal to default value.
By default, Ethernet switches do not output log information to user terminal.
This command takes effect only after system logging is started.
For the related commands, see info-center enable,display info-center.
Example
# Configure channel 0 to output log information to user terminal.
[Quidway] info-center monitor channel 0
4.5.13 info-center snmp channel
Syntax
info-center snmp channel { channel-number | channel-name }
undo info-center snmp channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels. By default, channel 5 is used.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English