Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-15
Field Description
OSPF timers, defining as follows:
Hello Interval of hello packet
Dead Interval of dead neighbors
Poll Interval of poll
Timers
Retransmit Interval of retransmitting LSA
Transmit Delay Delay time of transmitting LSA
3.1.17 display ospf cumulative
Syntax
display ospf [ process-id ] cumulative
View
Any view
Parameter
process-id: Process ID of OSPF, ranging from 1 to 65535. The command is applied to
all current OSPF processes if you do not specify a process ID.
Description
Using display ospf cumulative command, you can view the OSPF cumulative
information.
Example
# Display the OSPF cumulative information.
<Quidway> display ospf cumulative
OSPF Process 1 with Router ID 1.1.1.1
Cumulations
IO Statistics
Type Input Output
Hello 225 437
DB Description 78 86
Link-State Req 18 18
Link-State Update 48 53
Link-State Ack 25 21
ASE: 1 Checksum Sum: FCAF
LSAs originated by this router
Router: 50 SumNet: 40 SumASB: 2

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English