Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-11
OSPF process 200 debugging state:
OSPF SPF debugging is on
OSPF LSA debugging is on
3.1.14 display ospf abr-asbr
Syntax
display ospf [ process-id ] abr-asbr
View
Any view
Parameter
process-id: Process ID of OSPF, ranging from 1 to 65535. The command is applied to
all current OSPF processes if you do not specify a process ID.
Description
Using display ospf abr-asbr command, you can view the information about the ABR
and ASBR of OSPF.
Example
# Display the information of the OSPF area border routers and autonomous system
border routers.
<Quidway> display ospf abr-asbr
OSPF Process 1 with Router ID 10.110.98.138
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR S = SumASBR
Destination Area Cost Nexthop Interface
IA 2.2.2.2 0.0.0.0 10 10.153.17.89 Vlan-interface1
Table 3-1 Description of information generated by the command display ospf abr-asbr
Field Description
Destination Router ID of the ABR or ASBR
Area Area where the router is connected with ASBR
Cost The routing overhead value of the route
Nexthop Nexthop address to the destination
Interface The local output interface

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English