Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-13
Table 2-6 Field explanation of this command
Field Explanation
GigabitEthernet5/0/1:
traffic-red
Outbound:
Matches: acl r1 rule 0
running
Queue length of start
random discarding: 64
Queue length of stop
random discarding: 128
Max probability of
discarding: 20
RED Configuration information of the interface:
“Outbound” means that this configuration is
effective to packets sent by interfaces.
“ Matches: acl r1 rule 0 running” is the rule of
packet classification.
“ Queue length of start random discarding: 64”
means the queue length at which the packets will
be discarded randomly; the packet whose length
is less than 64 will not be discarded.
“ Queue length of stop random discarding: 128”
means the queue length at which the random
packet drop will stop; the packet whose length is
larger than 128 will be totally discarded.
“Max probability of discarding: 20” represents
that the probability of discarding when the queue
reaches the length where the system stops
random discarding.
2.1.11 display qos-interface traffic-redirect
Syntax
display qos-interface [ interface-name | interface-type interface-num ] traffic-redirect
View
Any view
Parameter
interface-name | interface-type interface-num: Interface of the switch, for more detail,
please refer to Command Manual – Port.
Description
Using the display qos-interface traffic-redirect command, you can view the setting
of the redirection parameters. The displayed content includes the corresponding ACLs
of the traffics to be redirected, the redirected interfaces, etc.
For the related configuration, see traffic-redirect.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English