Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-14
Example
# Display the redirection parameter configuration.
<Quidway> display qos-interface traffic-redirect
traffic-redirect
Matches: acl std1 rule 0 running
Redirected to: interface Ethernet5/0/2
Matches: acl std1 rule 1 running
Redirected to: interface Ethernet5/0/2
Table 2-7 Field explanation of this command
Field Explanation
traffic-redirect
Matches: acl std1 rule 0
running
Redirected to: interface
Ethernet5/0/2
Matches: acl std1 rule 1
running
Redirected to: interface
Ethernet5/0/2
Packet redirection configuration:
“Matches: acl std1 rule 0 running Redirected to:
interface Ethernet5/0/2” means the packets that
match with subrule 0 of the ACL std1 will be
redirected to the interface Ethernet5/0/2.
“Matches: acl std1 rule 1 running Redirected to:
interface Ethernet5/0/2” means the packets that
match with subrule1 of the ACL std1 will be
redirected to the interface Ethernet5/0/2.
2.1.12 display qos-interface traffic-statistic
Syntax
display qos-interface [ interface-name | interface-type interface-num ]
traffic-statistic
View
Any view
Parameter
interface-name | interface-type interface-num: Interface of the switch, for more detail,
please refer to Command Manual – Port.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English